Toshiba RP-F11 Manual page 3

RP-F11/F11L
2. DISASSEMBLY INSTRUCTIONS
i] ® 2.66 x 16mm Tapping (BLK)
BACK CABINE REMOVAL
1. Remove three screws (A) and one screw , then
press the hooked part © so the back cabinet can be
removed.
2.66 x 8mm Tapping e Hooked Part b
Figure 2
|
P.c. BOARD AND FRAME REMOVAL
1, Pull to remove the tuning knob.
9 © 2.6¢ x 10mm Tapping
2. Remove one screw ©) and unsolder © and ©, then
open the Jack plate side of the Front cabinet @ q Pee pn ¥
can be removed. ; Pee
Figure 3
REMOVAL OF THE FRAME FROM THE P.C.BOARD
1. Unsolder the meter terminals (Q) and remove the
sl LED P.C.Board
2. Remove the Dial Cord @ , and the LED P.C.Board
and the Switch P.C.Board so the Frame can be re-
moved from the P.C.Board.
Switch P.C.Board Meter
Figure 4