Table of Contents
Advertisement
HP Part No.
5061-0088
5061-0094
1460-1345
5061-0054
5061-0076
5061-0055
5061-0096
5061-2021
5061-2022
1494-0015
Description
Two front handles that attach to each side
of 3 1 /2" high cabinets.
Kit of lock link hardware for joining together
cabinets of equal depth. Units can be joined
side-by-side or vertically. This kit is required
whenever two (or more) sub-module units
are to be rack mounted side-by-side.
Tilt stand snaps into standard foot supplied
with instrument - must be used in pairs.
Rack mounting kit for one half module width
unit, 3 1/2-inches high. Includes one rack
flange (ear) and one half module width
extention panel (adapter).
Rack mounting kit for two half module units,
3 1/2" high. Kit includes two rack flanges
(ears). Also, lock-together kit (5061-0094)
is required for joining the two units together.
The cabinets must also be of equal depth.
Rack mounting kit for two units (one half
module width and one quarter module width).
Kit includes one rack flange and one quarter
width extension adapter. Lock-together kit
(5061-0094) is required for joining the two
units.
Support shelf for mounting one or more
3 112
"
high units which are half module or
quarter module width. Cabinet depths need
not be equal.
Front filler panel (one quarter module
width) for 3 1/2" high support shelf.
Front filler panel (one half module width)
for 3 1/2" high support shelf.
Slide kit for support shelves mounted in
HP rack enclosures.
1-13
INSTRUMENT AND MANUAL
IDENTIFICATION
1-14
Hewlett-Packard instruments are identified by a
two part serial number. The first part is the serial number
prefix, a number-letter combination that denotes the date
of a significant design change and the country of manufac¬
ture. The first two digits indicate the year (10 = 1970,
11 = 1971, etc.), the second two digits indicate the week,
and the letter A designates the U. S. A. as the country
of manufacture. The second part is the instrument serial
number; a different sequential number is assigned to each
instrument, starting with 00101.
1-15
If the serial number on your instrument does not
agree with those on the title page of the manual, Change
Sheets supplied with the manual of Manual Backdating
Changes define the difference between your instrument
and the instrument described by this manual.
1-16
ORDERING ADDSTIONALMANUALS
1 -17
One manual is shipped with each instrument.
Additional manuals may be purchased from your local
Hewlett-Packard field office (see the list at the rear of this
manual for addresses). Specify the model number, serial
number prefix, and the HP Part Number provided on the
title page.
1-19
In addition to this manual, the unit is shipped with Pro¬
gramming Note 59501A/HP85-1 (HP Part No. 59501-90003)'.
This note also applies to the 59501B in all respects and pro¬
vides programming examples for use with the HP85 or other
BASIC language controllers, as well as CV/CC Programming
Connections between the 59501A and various HP Power Sup¬
plies. This information supplements the programming examples
for the 9825 given in Section III of this manual.
1-2
Advertisement
Table of Contents
