4.2.
4.2.1.
4.2.2.
4.2.3.
4.2.4.
45
ACCESS TO PARTS
Cabinet, see 2.5.
Knobs
—
Remove the cap from the knob.
—
Unscrew the nut and remove the knob.
Text plate
—
Remove the cabinet, see 2.5.
—
Remove the turn-knobs, see 4.2.2.
—
Remove the dial.
—
Remove the plastic cover of the mains switch.
—
The text plate can now be removed.
Be careful:
The textplate is fitted to the frontplate by double sided adhesive tape.
Pushbutton unit
Replacing a pushbutton lever.
The single pushbutton lever can be replaced from the front.
—
Push the spring towards the pushbuttons.
—
Remove the wire strap and/or lift the plastic reed between the contacts
—
Carefully tear the pushbutton lever out of the pushbutton.
Replacing a switch of the pushbutton unit
—
Bend the 4 retaining lugs back to their original positions.
—
Solder the new switch on to the printed circuit board.