Download Print this page
Electrolux EDSH4944BS Quick Manual

Electrolux EDSH4944BS Quick Manual

Advertisement

Quick Links

A Quick Guide to Getting Started
FAQs
• Why hasn't the dishwasher run?
The start of the cycle times out if the door is not closed immediately
(within 4 seconds) after pressing START.
Note: If a running cycle is paused, the floor light indicator stays ON
until the door is opened. The floor light indicator turns off if the
door is closed without pressing START.
• How do I know when the dishwasher cycle is complete?
During a running cycle, the blue LED shines on the floor. You'll
know that the cycle is complete if you see the white LED light
shining on the floor.
Before you begin
• Before starting your dishwasher
Check that all plastic ties, packing, and literature are removed from
the wash arms, baskets and dispenser. Make sure your top rack,
bottom rack, and silverware basket are in place. Check your Use &
Care Manual. If dishwasher is connected to a food disposal, check
that the knock-out plug is removed or it will prevent proper draining.
• Fill Rinse Aid Dispenser
Rinse aid greatly improves drying and reduces water spots. Twist off
the rinse aid dispenser cap and fill until the indicator reaches full,
then replace cap.
Care and cleaning
• Clean stainless steel door and
handles with warm soapy water and
a dishcloth. Rinse and dry thoroughly
using a soft cloth.
• Keep odors at bay and clean the
inside of your dishwasher. See your
Use & Care Manual to learn how.
We Recommend:
Occasionally cleaning the cylinder
filters to maximize wash and
draining performance.
The versatile racking system
provides the utmost in flexibility.
*See product page on electrolux.com
A26298401
(April 2023)

Advertisement

loading

Summary of Contents for Electrolux EDSH4944BS

  • Page 1 During a running cycle, the blue LED shines on the floor. You’ll provides the utmost in flexibility. know that the cycle is complete if you see the white LED light shining on the floor. A26298401 (April 2023) *See product page on electrolux.com...
  • Page 2 Getting Started Select the wash cycle and dry options appropriate for your load. Note that the LEDs illuminate your selections. • Open the door and select the wash cycle and options. • Press START and immediately close the dishwasher door to start the cycle. The door must be closed immediately after pressing START, otherwise you will need to make your selections again.