Daily Maintenance - Philips ADD6901 User Manual

Sleep mode
• If there is no operation within 1 minute, the dispenser will automatically go to sleep mode.
• When the dispenser is in sleep mode, only the safety lock indicator is on, and all other indicators are
off.
• Touch any button to end the sleep mode.
Emptying the tank and pipes
• Long press "85℃" button and "300ml" button for 3 seconds, the dispenser
will extract water until the �ltered water tank and the inner pipes are empty.
Note: In order to avoid dry-heating, if the tank and pipes have been emptied,
please extract some ambient water before extracting hot water.

7. Daily maintenance

If the product is not used for over two days, it is suggested to change the water in the tap water
tank and then empty the tank and pipes twice.
If the dispenser will not be used for over one week, please use one-key emptying to empty the
water tank and disconnect the dispenser from the power supply. Seal the �lter cartridge and store it
in the refrigerator (2-5°C, do not put it into the freezer). When you use it again, please follow the
cleaning procedures for �rst time use.
Tap water tank descaling
• It is recommended to descale the tap water tank every 3 months to avoid
scale build-up in the tap water tank.
• Descaling procedure: �ll the tap water tank to half-way and add 30g of
citric acid. Stir lightly then soak for 2 hours (do not place the tap water tank
back to the dispenser). Then discard the citric acid solution and clean the
entire water tank with tap water.
* Please purchase the cleaning brush and citric acid separately.
08
3s 3s