Toshiba NB205 Series User Manual page 45

Turning Off Your Computer where Electronic Devices are Regulated or
Controlled.
When you have to turn off your computer aboard an aircraft or in places
where electronic devices are regulated or controlled, always shut down the
computer completely or put the computer into Hibernation mode instead of
allowing it to go into Standby mode, and turn off any wireless
communication switches or devices, while in Standby mode, the computer
operating system may reactivate itself to run pre-programmed tasks or to
preserve unsaved data, and might interfere with aviation or other systems,
possibly causing serious injury.
■
Before entering Standby Mode, be sure to save your data.
■
Do not install or remove a memory module while the computer is in
Standby Mode. The computer or the memory module could be
damaged.
■
Do not remove the battery pack while the computer is in Standby Mode
(unless the computer is connected to an AC power source). Data in
memory could be lost.
Benefits of Standby Mode
The Standby Mode feature provides the following benefits:
■
Restores the previous working environment more rapidly than does the
Hibernation Mode feature.
■
Saves power by shutting down the system when the computer receives
no input or hardware access for the time period set by the System
Standby Mode feature.
■
Allows the use of the panel power off feature.
Executing Standby Mode
You can also enable Sleep Mode by pressing FN + F3 - please refer to
Chapter 5,
You can enter Standby Mode in one of three ways:
1. Click Windows Start button, click Turn Off Computer, and then click
Standby.
2. Close the display panel. This feature must be enabled.
3. Press the power button. This feature must be enabled.
When you turn the power back on, you can continue where you left when
you shut down the computer.
■
When the computer is in Standby Mode, the Power indicator will blink
amber.
■
If you are operating the computer on battery power, you can lengthen
the overall operating time by turning it off into Hibernation Mode -
Standby Mode will consume more power while the computer is off.
User's Manual
The Keyboard, for further details.
Getting Started
3-10