Table of Contents
Advertisement
2 Set the current time with the
HOURS and MINUTES buttons.
3
Press the TIME button again.
The time indication starts lighting instead of blinking.
m isa \ \ i /,
^_
i ■ j n
"
PM
I - J U
^ AM
I ■ 3 0
1 The time indication will disappear automatically in
10 seconds.
To check the current time setting, press the TIME
button twice.
Example: The current time is 1:30 p.m.
The setting of the current time is now complete.
2
Set the turn-off time with the
HOURS and MINUTES buttons.
M fX)
W
lv
\ 1 /
^
O _
iinn
~
<JpM
I I .1 I U
/ I \
%J
Point the signal window of the remote controller toward the cooling unit,
and press the I (RESERVE) button.
The O (OFF) mark starts lighting instead of blinking and the sign
0
(RESERVED) lights. A beep occurs and the
0
(TIMER) lamp lights on the
cooling unit.
►
I
O
>
*
•
n n
Example: The device will turn off at 11:00p.m.
Q ^
0 w
> >
•
u u
The setting of turn-off time is now complete.
2
Set the turn-on time with the
HOURS and MINUTES buttons.
\
1
/
_
_ ■
i ■ n i t
/!n
3
Point the signal window of the remote controller toward the cooling unit,
and press the l (RESERVE) button.
The | (ON) mark starts lighting instead of blinking and the © (RESERVED) sign
lights. A beep occurs and the 0 (TIMER) lamp lights on the cooling unit.
~i ■ n n
I - UU
Example:
The device will simply turn on at 7:00 a.m.
(Circulating and fan operation)
The device will automaticly turn on and control to the temperature set
at 7:00 a.m.
(Cooling and dehumidifying operation)
The setting of the turn-on time is now complete.
4
Set the turn-on time with the
HOURS and MINUTES buttons.
i
i n- _i n
'PM
I IJ. J u
~i ■ n n
I
•
u u
5
Point the signal window of the remote controller toward the cooling unit,
and press the l (RESERVE) button.
The i (ON) mark starts lighting instead of blinking and the © (RESERVED) sign
lights. A beep occurs and the © (TIMER) lamp lights on the cooling unit.
O
r
n- n n
PM
I U ■ J U
~i
-
n n
i
•
u u
Example:
The device will turn off at 10:30 p.m. and then turn on at 7:00 a.m.
(Circulating and fan operation)
The device will turn off at 10:30 p.m. and then automaticly turn on and
control to
the
temperature set at 7:00 a.m.
(Cooling and dehumidifying operation)
The settings of the turn-on/off times are now complete.
• The timer may be used in three ways: off-timer, on-timer, and on/off (off/on)-timer. Set the
current time at first because it serves as a reference.
• As the time settings are stored in memory in the remote controller, you only have to press
the I (RESERVE) button in order to use the same settings next time.
• ON-Timer
The device will turn on before the preset time.
Temperature will be reached at the designated time.
Operation starting time varies depending on the conditions such as room temperature, set
room temperature, etc.
-
11
-
Advertisement
Table of Contents
