Table of Contents
Advertisement
HOW TO SET THE SLEEP TIMER
Set the current time at first if it is not set before (see the pages for setting
the current time). Press the Q (SLEEP) button, and the display changes as
shown below.
CANCEL
(
Mode
Indication
N
Sleep timer
V
r-^1 hour->-2 hours—► 3 hours -► 7 hours —i
'-Sleep timer off -*-'
J
Sleep Timer:
The device will continue working for the designated
number of hours and then turn off.
Point the signal window of the remote controller toward the cooling
unit, and press the SLEEP button.
The timer information will be displayed on the remote controller. The
TIMER lamp lights with a beep in the cooling unit. When the sleep
timer is set, the display indicates the turn-off time.
3«©
OamD- J O
Example: If you set 3 hours sleep
L • J U
time at 11:38 p.m., the turn-off
time is 2:38 a.m.
^Start^
The device will be turned off by the sleep
timer and turned on by on-timer.
1
Set the ON-timer.
Press the EH (SLEEP) button and set the sleep timer.
For example:
El
E'h&
I • _l U
Q
AM
l
* _
l !_)
I
\ M r • n n
o . ij ij
In this case, the device will turn
off after 2 hours (at 1:38 a.m.)
and starts at 6:00 next morning.
Point the signal window of the remote controller toward the cooling unit, and press theO (CANCEL)
button.
The © (RESERVED) sign goes out with a beep and the© (TIMER) lamp turns off on the cooling unit.
NOTE
If you set the sleep timer after the off-timer or
on/off-timer is set, the sleep timer becomes
effective instead of the off- or on/off-timer.
-
12
-
Advertisement
Table of Contents
