Sony STR-DG710 Operating Instructions Manual page 79

Multi channel av receiver
Hide thumbs Also See for STR-DG710:
Table of Contents

Advertisement

The source
sound
input from the HDMI
jack is not output
from
the receiver
or
the TV speaker.
• Check the HDMI connection.
• You cannot listen to the Snper Audio CD
by connecting
HDMI.
• Depending
on the playback
component,
yon may need to set up the component.
Refer to the operating
instrnctions
supplied
with each component.
The left and right sounds
are
unbalanced
or reversed.
• Check that the speakers
and components
are connected
correctly
and securely.
• Adjust the balance
parameters
using the
LEVEL
menu.
There
is severe
hum or noise.
• Check that the speakers
and components
are connected
securely.
• Check that the connecting
cords are away
from a transformer
or motor,
and at least
10 feet away from a TV set or fluorescent
light.
• Move your audio components
away from
the TV.
• The plugs and jacks
are dirty. Wipe them
with a cloth slightly
moistened
with
alcohol.
There is no sound, or only a very low-
level sound is heard from the center/
surround/surround
back speakers.
• Select a CINEMA STUDIO EX mode
(page 52).
• Adjnst the speaker level (page 31).
• Make sure the center/surround
speakers
are set to either "SMALL" or "LARGE"
(page 39).
• Make sure the surround back speaker is set
to "YES" (page 39).
There
is no sound
from
the surround
back
speaker.
• Some discs have no Dolby
Digital
Surround
EX flag even though
the
packages
have Dolby Digital
Surround
EX
logos. In this case, select "SB ON" (page
37).
There is no sound
from the sub woofer.
• Check that the sub woofer
is connected
correctly
and securely.
• Make sure you have turned on your sub
woofer.
• Make sure the sub woofer is set to "YES"
(page 39).
• There
is no sound from the sub woofer
depending
on the sound field.
The surround
effect
cannot
be
obtained.
• Make sure the sonnd field fimction
is on
(press MOVIE,
or MUSIC).
• Sound fields do not function
for signals
with a sampling
frequency
of more than
48 kHz.
Dolby
Digital
or DTS multi channel
sound
is not reproduced.
• Check that the DVD, etc. you are playing
is recorded
in Dolby
Digital
or DTS
1=,
D..
format.
• When connecting
the DVD player, etc., to
the digital input jacks
of this receiver,
check the audio setting (the settings
for the
audio output)
of the connected
component.
8"
continued_
79Us

Advertisement

Table of Contents
loading

Table of Contents