Charge The Battery - Philips 650 User Manual

Charge the battery

Your phone is powered by a rechargeable battery. A
new battery is partially charged and an alarm will warn
you when the battery reaches low. If the battery is
completely flat, it will take 2 or 3 minutes of charging
for its icon to reappear.
You may lose all your personal settings if you remove
the battery when the phone is switched on.
1. Once the battery and battery cover are clipped
on the phone, plug the connector of the charger
(supplied with the phone, in the box) into the
socket at left side of the phone on one end, then
plug it into a main AC power socket with easy
access on the other end.
Getting started
2. The battery symbol indicates the state of charge:
- during charging, the 4 charge indicators scroll;
it takes around 1.45 hours to fully recharge
your mobile phone.
- when all 4 bars are steady the battery is fully
charged: disconnect the charger. Depending
on the network and condition of use, talk time
goes from 2 to 8,5 hrs and stand-by time from
200 to 850 hrs.
Keeping the charger plugged to the mobile when the
battery is fully charged doesn't damage the battery.
The only way to turn off the charger is to unplug it, so
use an easily accessible AC power socket. You can
connect the charger to an IT supply (Belgium only).
3