Cleaning - Silvercrest SUR 48 C4 Operating Instructions Manual

■ During the cleaning procedure, you will hear a chirping sound.
■ The operating LED
■ The time counts down to zero on the display
switches off automatically.
♦ To check the progress, even during the cleaning process, the cleaning
process can be paused by pressing the OFF button
♦ Press the ON button
♦ After the cleaning process finishes, disconnect the appliance from the power,
open the lid
steel bath
♦ Rinse the cleaned parts thoroughly with clean water before drying them with
a soft and dry cloth.
NOTE
► Most dirt particles detach or loosen after the first cleaning. If there is still
dirt residue after the cleaning, take a soft cloth and remove it by wiping
gently. If you have still not removed all of the dirt particles, repeat the
cleaning process once the appliance has cooled down.
DANGER!
► Always disconnect the appliance from the socket after use and before
pouring out the cleaning fluid.
♦ To pour out the cleaning fluid, hold the appliance over a sink, flip up the lid
and tip out the water via the front opening.

Cleaning

WARNING!
Observe the following safety information to avoid hazards and property
damage:
► Always pull out the plug before cleaning the appliance.
► Only clean the appliance when it is switched off and cooled down.
CAUTION!
Possible damage to the appliance.
Moisture can cause damage to the appliance.
► To avoid irreparable damage to the appliance, ensure that no moisture
enters it during cleaning.
│ GB │ IE │ NI │ CY
■ 14
lights up during the cleaning process.
5
to resume the process.
2
and carefully remove the respective item from the stainless
6
.
7
and then the appliance
.
4
SUR 48 C4
6