Advertisement
OPERATION
selector, depress the No. 6 button of the input B
@) which is not connected to any camera.
ON Bye
;
achieved.
The previewed
fade effect can now
be
2}
Select one input singal via the Input A Selector
supplied to line output [PROGRAM] .
@ and another via the Input B Selector @.
3)
Pie the MIX button on the Function Selector
EADE
OUT
FADE
IN
4)
Watch the picture on the preview monitor.
5)
Move both Mix and Wipe Levers (§) together from
top to bottom or vice versa for a jap-dissolve.
6)
Depress the Cut ON/OFF
Switch q2 to place in
the OFF position when the desired effect is achiev-
ed.
[It may
be
supplied
to
the
line
output
[PROGRAM]
A.
Lap-dissolve
SCENE 1
U3
a)
|
SCENE 1 and SCENE 2
@
Fade-in
and
fade-out
can
be obtained
by separately
a:
operating the Mix and Wipe Levers for EFFECT ©. If
both fade levers are in the up position, move the left of
them downward
for picture to fade out. !f this lever is
Bee
subsequently moved top, the picture will fade in.
2.
Wipe
mode
a)
Six
patterns can
be selected with
the Wipe Mode
Selector ®.
Z
SCENE 2
Advertisement
