Advertisement
c) Supertmposing
@
Connect
the super
input signal
to the Video
Input
Connector for Superimpose
@) When the Super ON/
,;
OFF Switch (3 is turned ON, the superimposing singal
|
will be superimposed onto the tine signal Choose light
ing and contrast so that the super
input signal will be
ame
clearly superimposed onto the line signal
If the input
INPUT A
SCENE 1
signal level cannot be controlled adjust the Super Level
+
Control (4
1}
Depress the Super ON/OFF Switch 3 to place in
the ON position
2)
Adjust the super level with the Super Level Con
oe
Panasonic
INPUT B
EFFECTED SCENE
TALLY
AND
INTERCOM
CONNECTIONS
When connecting the tally and intercom circuits of your Special Effects Generator (S E G) model No WJ-4600C with your
Panasonic Color Cameras such as WV-555, WV-888 and WV-6000, following connection is required
—
Instruction for connection
With Color Cameras
1 Solder a 4 pin Tally/Intercom plug (YQAAA-33) to each end of a 4-Conductor Cable
2
Connect the cable as follows
©)
a ee
EEE! | 5
ma
GUE
To Tally/Intercom Connector
#
on Special Effects Gen
Special Effects Gen
(WV-4600C}
To Tally/Intercom Connector
on RCU for WYV-555, WV-888
and WV-6000
EXTERNAL
DC
INFORMATION
The special effect generator receives external DC power
CAUTION
Use
only with
a 12V
DC
power
supply
The 4P connection
for external
OC power source is
marked class 2
shown as,
Do not use with an external storage bat-
(4) @)
+
tery untess provided with a fuse rated at
8 amps or less and located within 5 inches
of the battery connecting means
(3) (2)
12V DC Nominal
a
Advertisement
