Mounting Of Pilot Lamp; Important Assembly Point; Caution/Hints On Repairs - Panasonic NI-100DX Service Manual

5.3.

Mounting of Pilot Lamp

Step 1 Properly wire the lead wire E, F and pilot lamp and
screw tightly. Push the lead wire E and F upward and insert.
Mount the rear handle cover.
Caution: If the cord is not fixed in the cord slots, it may be
damaged.
Fix the Contact Pin B together with the washer.

6 Caution/hints on repairs

5.4.

Important assembly point

Step 1 Wiring screw M3.5 x 5 and M3.5 Washer must be fixed
before using the Stand assembly.
5