Silvercrest 321540 1901 Operating Instructions Manual page 29

Assembly/Disassembly
CAUTION! PROPERTY DAMAGE!
► All accessories are coated with a thin film of oil to protect them from
corrosion . Therefore, carefully clean all of the parts before using the
appliance for the first time, as described in detail in the chapter "Cleaning" .
After subsequent usage, always apply a light coating of cooking oil to the
metallic components .
NOTICE
► Before using for the first time, remove the protective foil from the control panel .
Assembling the meat grinder
Unfold the fold-out side . There you will find the step-by-step illustrations for
assembling the appliance .
1) Place the transport screw 7 in the meat grinder casing 6 .
2) Place the spring 8 onto the transport screw 7 .
3) Then fit the cross blade 9 on so that the sharp side points away from the
spring 8 . Ensure that the square opening in the cross blade 9 is placed
correctly on the square axle .
WARNING! RISK OF INJURY!
► The cross blade 9 is very sharp! Risk of injury!
CAUTION! PROPERTY DAMAGE!
► The appliance will be damaged if the cross blade 9 is inserted the other
way around!
4) Select the appropriate cutting disc 0/sausage disc e .
■ 26 │ GB │ MT SFW 350 D2