Table of Contents
Advertisement
-- Recording - Basics --
Recording
a picture
Your camcorder automatically focuses for you.
(1) Remove the lens cap by pressing both knobs on its sides and attach the lens
cap to the grip strap.
(2) Install the power source and insert a cassette. See "Step 1" to "Step 3" for more
ilfformation
(p. 11 to 19).
(3) Set the POWER switch to CAMERA while pressing the small green button.
Your camcorder is set to the standby mode.
(4) Open the LCD panel while pressing OPEN. The viewfinder automatically
mrns off.
(5) Press START/STOP.
Your camcorder starts recording. The REC indicator
appears. The camera recording lamp located on the front of your camcorder
lights up. To stop recording, press START/STOP
again.
The recording lamp lights up in the viewfinder when you record with the
viewfinder.
1
POWER
Camera
recording
lamp
Microphone
2
5
i_
POWER
_i
_140mn Ili_l SPREC 0:00:0 E
2O
Advertisement
Table of Contents
