Table of Contents
Advertisement
Recording
a picture
Note
Fasten tile grip strap firmly.
Do not touch the built in microphone
during
recording.
To enable
smooth
transition
You can
make
the transition
between
the last scene
you
recorded
and
the
next
scene
smooth
as long
as you
do not eject
the cassette
even
if you
turn
offyour
camcorder.
When
you
cbange
the battery
pack,
set tbe POWER
switch
to OFF
(CHARGE).
If you leave your camcorder in the standby
mode for 5 minutes while the cassette
is inserted
Yore can-lcorder
automatically
turns off. Tbis is to save battery
power
and to prevent
battery
and tape wear. To resume
the standby
mode, set the POWER
switch to OFF
(CHARGE)
once, then turn it to CAMERA
again.
To set the counter
to 0:00:00
Press COUNTER
RESET (p. 76).
R
I
(1) Set the POWER
switch
to OFF (CHARGE).
(2) Close the LCD panel.
(3) Eject the cassette.
(4) Attach
the lens cap.
After using your camcorder
Remove the battery pack Dora your camcorder to avoid turning on the built in light
accidentally.
The LCD panel moves about 90 degrees to the viewfinder side and about 180 degrees to
tbe lens side.
If you turn tbe LCD panel over so that it faces tbe other way, the _ indicator appears
on the screen (Mirror mode).
180°
When
closing
the LCD
panel,
set it vertically
until
it clicks,
and
swing
it into
the
camcorder
body.
21
Advertisement
Table of Contents
