Advertisement
6. MAINTENANCE
6.1.
CHANGING THE DIGITAL METER BATTERY
6.1.1.
Remove the rubber protective cover from the meter.
6.1.2.
Remove the screw and cover from the side of the meter.
6.1.3.
Remove and replace battery (fig.15).
6.1.4.
Replace cover and secure with screw.
6.1.5.
Replace the protective rubber cover.
6.2.
Before every use visually check the supply hose for damage and check all joints for leaks, any damaged component must be
replaced or leaks repaired before using.
6.3.
Check the nozzle valve for leaks, if it does not seal, replace before using.
6.4.
Drain air regulator water trap daily.
6.5.
Top up lubricator as required, using a quality air tool oil.
6.6.
To change the silencer, remove the circlip (fig.14) and remove the old silencer, place a new silencer into the recess and refit the
circlip.
NOTE: For any other maintenance and repairs the unit should be returned to your Sealey stockist.
fig.14
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BATTERY REMOVAL SEE SECTION 6.1
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our
technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.15
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
AK4563D.V2 Issue 1 25/05/21
Advertisement
