Note
For secure connection, it is recommended to use a device supporting
●
WPA2 / WPA3 as wireless LAN type. The encryption type depends on the
connected device.
Ensure to use a LAN straight cable.
●
Set up and connect equipment required for the network environment. You
●
cannot make such settings on this TV. Read the manual of the equipment.
If your modem has no broadband router functions, use a broadband router.
●
If your modem has broadband router functions but there are no vacant
●
ports, use a hub.
Ensure that the broadband routers and hubs are compatible with
●
10BASE-T / 100BASE-TX.
If you use the equipment compatible only with 100BASE-TX, category 5 or
●
later LAN cables are required.
Contact your Internet Service Provider (ISP) or telecommunications
●
company for further assistance regarding the network equipment.
Confirm the terms and conditions of the contracts with your Internet
●
Service Provider (ISP) or telecommunications company. Depending on the
contracts, additional fees may be charged or multiple connections to the
internet may be impossible.
Select
Setup
>
System Menu
●
when changing or making the network connection again.
Depending on the network condition, the content may not be played back
●
properly.
In case the password of the registered device or user is known by a third
●
party, there is a risk of unauthorised entries. Keep your password safe.
Panasonic will make no warranty for the unauthorised entries.
To prevent a risk of interception, unauthorised entries and hacking, set up
●
the proper security settings (encryption setting).
>
Reboot
in main menu and reboot this TV
- 207 -