Panasonic TX-65MZ2000B Ehelp page 357

Digital TV
Some features are not available on all models.
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
Block noise, frozen or disappearing image occurs / Some channels cannot be
tuned
Check the position, direction and connection of the aerial or dish.
●
Check Signal Condition. If the level of
●
signal is weak. Connecting the aerial to the TV directly may improve signal
quality than connecting the aerial through the equipment (Set top box,
DVD, etc.).
Watching > Tuning and editing channels > Signal Condition
Watching > Basic > Basic connection
Weather conditions affect signal reception (heavy rain, snow, etc.), in
●
particular in poor reception areas. Even during good weather, the high
pressure can cause poor reception of some channels.
Due to the digital reception technologies involved, quality of the digital
●
signals may be relatively low in some cases, despite good reception of
analogue channels.
Select Setup > System Menu
●
Satellite Auto Setup
Check connections and dish alignment.
●
Watching > Basic > Basic connection
If the problem persists, consult your local dealer.
●
Faulty dish message appears
The satellite cable may be short-circuited or there may be connection
●
problems of the cable. Turn off the TV by unplugging the mains plug, then
check the cable for connection, and turn it on again.
If the message persists, consult a dish installer for checking the dish and
●
cable.
> Reboot
cannot be done completely
- 357 -
Signal Quality is low, the DVB
in main menu and reboot this TV.