Labeling A Cassette - Sony DCR-TRV8 Operating Instructions Manual

Labeling a cassette
If you use a tape with ca_,ette n_emo_,, you can label a cassette, The label can
consist of up to 10 characters and is stored in cass, ette memory. When you in,_,rt
the labeled cassette and turn the power on, the label is displayed on the LCD
screen, in the viewfinder, or on the TV screen.
(1) Insert the cassette you want to label.
(2) Set the POWER switch to VTR.
(3) Press MENU to make the menu display appear.
(4) Turn the SEL/PUSH EXEC dial to select r,_, then press the dial.
(5) Tum the SEL/PUSH EXEC dial to select TAPE TITLE, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select the column of the desired character,
then press the dial.
(7) Turn the SEL/PUSH EXEC dial to select the desired character, then press the
dial.
(8) Repeat steps 6 and 7 until you finish the label.
(9) Turn the SEL/PUSH EXEC dial to select [SET], then press the dial.
The label is stored in memory.
TAPE TITLE
ABCDE 12345
FGHIJ 67B90
uvwxy ISETI
Z& 7!
{MENU] : EN0
TAP E TITLE
M.........
ABCDE 1_345
K O' ,/
PQC_T I ÷ J
UVWXy [SET]
IMENUI : END
70