Advertisement
TROUBLESHOOTING
peing used.
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there
is something wrong with this component, check the points below. Sometimes the trouble
may lie in another component. Investigate the other components and electrical appliances
f the trouble cannot be rectified even after exercising the checks listed below, ask your
nearest PIONEER authorized service center or your dealer to carrv out renair work
Cause
Normal operation of the
remote control unit is
impossible.
replacement.
by something
operated.
The component being
operated is too far from
the unit
Use the unit within a range
of 7 meters.
Forgot to press reset
button after battery
The remote contro! sensor
window of the component
being operated is obscured
The remote control
function switch is not
correctly set for the
component being
Components of other
makers cannot be
operated,
eevee
=
ee
|
The correct number for
T Reset the maker's number.
the maker has not been
selected.
Press reset button.
Remove any obstacle that
may be in front of the
remote control sensor
'window.
Select the correct function
setting (AUDIO, VIDEO,
FREE A to E).
settee
The component you are
using employs a special
remote control code.
Different components from
the same maker may use
different remote control
codes. If you still can't
operate a component after
confirming the number
setting of the maker,
|
perform the LEARN
operation.
Symptom
aaa}
After performing the
LEARN operation, a
component cannot be
operated.
i
oo 2s
The signal is ir
memorized,
ee
of
Perform the LEARN
operation once more.
During LEARN operation,
NG is displayed.
The signal couldn't be
learned (NG is displayed).
operation,
4
Repeat the LEARN
anf
The memory is full (FULL
is displayed)
If there is a OPERATION
you want to LEARN,
select a command
key
that is seldom used and
clear it. After checking
the capacity of the
memory, perform the
LEARN operation.
The MLT command
doesn't operate.
The order in which the
operations were
memorized was incorrect.
Memorize the operations
in the correct order.
The remote control
windows of a series of
components being
operated are too far apart.
Place the components as
close together as possible.
28
<ARD1011>
En
Advertisement
