Remove The Base Assembly For Vesa Mounting - Philips 24B1D5600 User Manual

2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any possible
damage or injury.
1. Extend the monitor base to its
maximum height.
2. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen. Then
lift the monitor stand.
3. Use your fingers to loosen the
screw located at the bottom of the
base,and remove the base from the
stand.
1
2
4. Remove the hinge cover from
monitor body by using your fingers.
5. Use a screwdriver to remove the
screws on the arm,and then detach
the arm/stand from the monitor.
Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface.
VESA Mounting Screw M4. Always
contact manufacturer for wall-mount
installation.
14
3
1
4
5
100mm