Remove The Cover(S) - ABB ACQ580-01 Quick Installation And Start-Up Manual


Distance between mounting holes

Put the drive on the wall and tighten the screws
1

6. Remove the cover(s)

7. Optional - remove the cable/conduit box (to modify holes) - 4 screws
1
8. Attach a residual voltage warning sticker to the drive in the local language
To the control panel mounting platform.
Frame Width (a) Height (b)
size
mm in mm
R1 175 6.89 497
R2 175 6.89 581
R3 244 9.61 622
Your drive's frame size is shown on the drive
nameplate.
2
8 x T20 Torx
Tighten to 2.5 Nm (1.8 lbf-ft)
4 x T20 Torx
Tighten to 2.5 Nm (1.8 lbf-ft)
in
19.57
22.87
24.50
3
3