Actuator Removal - LG ARNU363DDA4 Installation Manual

ACTUATOR REMOVAL

Actuator Removal
Step 1�
Remove the filter from the outside air hood by opening the filter clip
and sliding the filter back from the bottom.
Step 2�
Remove the two screws on the horizontal middle part on the corners
of the outside air hood to release the perforated plate. After the
perforated plate is released, remove.
Step 3�
Remove the screw on the logic module bracket to detach the logic module-bracket assembly.
Figure 27: Removing the Logic Module.
16
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Figure 25: Removing the Filter.
Figure 26: Releasing the Perforated Plate.
Figure 28: Unscrewing the Logic Module Bracket.