DAMPER TEST
Damper Test A
Step 1�
The damper open procedure can be found by clicking the down (↓)
button on the JADE controller when it is displayed in the default
STATUS screen as seen below.
Figure 59: Default STATUS Screen.
Step 3�
Scroll down in the CHECKOUT Menu until the screen reads DAMP-
ER OPEN. Press ENTER again.
Figure 61: CHECKOUT, DAMPER OPEN Screen.
26
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Step 2�
When the CHECKOUT screen appears, press the ENTER button.
(The ENTER button is the button furthest to the right.)
Figure 60: CHECKOUT Screen.
Step 4�
The screen will ask if a test should be run. The test will begin as
soon as the ENTER button is clicked again.
Figure 62: RUN? Screen.