Advertisement
USE OF LEARNING FUNCTIONS
Questions and Answers about the Learning Function
Q: The remote control unit of my VCR has two REC (record-
ing) keys. They both have to be pressed at the same time
to start recording. What is the learning procedure in this case?
A: Hold one of the keys on the programmable remote con-
trol depressed (except the VCR
@ key) until the TRANS-
MIT/LEARN indicator lights up, and then press the two keys
on the VCR remote control simultaneously.
Q: The remote control unit of my VCR has a REC (record-
ing) key and a PLAY (playback) key and they both have to
be pressed at the same time to start recording. What is the
learning procedure in this case?
A:
Hold one of the keys on the programmable remote con-
trol depressed (except the VCR
@ key) until the TRANS-
MIT/LEARN indicator light up, and then press the REC and
PLAY keys on the VCR remote contro! simultaneously.
¢ As described above, operations which require two keys
to be pressed at the same time are programmed by press-
ing the two keys simultaneously.
NOTE:
/f both of the REC keys ( C3 Gq / are not pressed simulta-
neously, the VCR ¢ key cannot be memorized.
Operating other equipment
by the programmable
remote control unit
1. Set the SR RECALL/USE/LEARN selector of the program-
mable remote contro! unit to the USE position.
2. Set the TRANSMIT mode selector switch to the desired
position (AUDIO/VIDEO).
¢ Set the VIDEO position for programming as described
in the example.
3. Press the key of the desired function.
¢ The TRANSMIT/LEARN
indicator lights up while the
remote control unit is sending codes.
Note:
© When operating a device with the programmed remote
controller, always set the LEARN changeover switch to the
USE position.
© For functions which require two keys to be pressed at the
same time (recording, etc.) or functions for which sever-
al codes are sent simultaneously (auto functions, timer
programming, etc.) the programming procedure is different
and improper operation may occur.
¢ The remote control unit will not operate when the battery
cover is removed.
10
<ARD1005>
Returning to the Initial Settings
To return all settings to the Pioneer Uniform Remote Con-
trol Code settings, set the SR RECALL/USE/LEARN switch
to the SR RECALL position. Proceed as follows to memorize
new codes when the memory is full.
1. Set the RECALL/USE/LEARN
selector switch to the
LEARN position.
2. Press one of the LEARN keys. The TRANSMIT/LEARN
indicator will light up.
;
3. Use a ball-point pen or similar object to press the
M - CLR button while the TRANSMIT/LEARN indicator
is flashing.
¢ The
programmed
functions
for the AUDIO
and
VIDEO positions are cleared, and the remote control
unit is reset to the Pioneer uniform remote control
codes.
© Do not press the keys with too much force.
SURROUND
VIDEO
FUNC
AV PROGRAMMABLE
REMOTE CONTROL UNIT
Ccu-sa004a
Memory Clear
(M - CLR) button
SPECIFICATIONS
Operation system:
Programmable
infrared remote con-
trol system
Applicable batteries: two LR6/AM-3 alkaline batteries
Attachments:
two batteries, an operating instruc-
tions, a written guarantee and two
templates.
,
Outer dimensions:
73 W X 21H X 218D mm
Weight:
130 g (excluding batteries)
fern
eee oe
yreceneneneeenee
neem
een
enencinrnnee
eee
Rt
ttt
SCHR
en Atte
CEN
HO NATO
EAE
eNO TONE
Advertisement
