Picture - Adjust Picture Modes And Settings - JVC LT-24CA120 Instruction Manual

Settings Menu
6

Picture - Adjust Picture Modes and Settings

To select Picture go to SETTINGS - DEVICE PREFERENCES - PICTURE. Here you'll be able to adjust all the picture modes and picture
setting.
The following table show all the available picture setting adjustment on your TV. Not all of these setting apply to all Inputs.
Your TV has some pre-set picture modes: STANDARD - VIVID - SPORT - MOVIE - GAME. The default setting is
Picture Mode
STANDARD. You can also manually adjust each mode.
Auto backlight is set to Eco as default but can be changed to OFF - LOW - MIDDLE - ECO. Adjusting the
Auto Backlight
setting may increase your TVs power consumption.
Backlight
Increases or decreases the brightness of the backlight from 0 - 100.
Brightness
Increases or decreases the picture brightness from 0 - 100.
Contrast Increases or decreases the picture contrast from 0 - 100.
Colour Increases or decreases the colour from 0 - 100.
HUE
Increases or decreases the hue from 0 - 100.
Sharpness Increases or decreases the picture sharpness from 0 - 20.
Gamma Choose from Dark, Middle (standard) or Bright. Highlight your desired setting then press OK.
Colour The colour temperature setting has 4 preset settings USER - COOL - STANDARD - WARM, when selected each
Temperature
of these settings has individual adjustments. Red, Green and Blue gain can all be adjusted from -100 to 100.
Advanced
Select to have more advanced adjustments to your TVs picture.
Video
DNR (Dynamic
Noise Reduction)
MPEG NR (Noise
Reduction)
Adaptive Luma
Control
Local Contrast
Control
60
Picture
Dynamic Noise Reduction has 5 different setting OFF - LOW - MEDIUM - STRONG - AUTO.
The default setting is MEDIUM. Highlight your desired setting then press SELECT.
MPEG Noise Reduction has 4 different setting OFF - LOW - MEDIUM - STRONG. The
default setting is MEDIUM. Highlight your desired setting then press SELECT.
Adaptive Luma Control has 4 different setting OFF - LOW - MEDIUM - STRONG. The
default setting is STRONG. Highlight your desired setting then press SELECT.
Local Contrast Control has 4 different setting OFF - LOW - MEDIUM - HIGH. The default
setting is STRONG. Highlight your desired setting then press SELECT.