Table of Contents
Advertisement
-92-
36
Adjusting the Video Picture and Audio Volume
Adjusting the Audio Volume
'You can adjust the audio volume of the LINE A and LINE B
signals.
Press AUDIO LEVEL to turn it on.
'The and v butions light up automaticaly.
[a] For LINE A image
[b] For LINE B image
Adjusting the Horizontal Center
Hf the image appears off the center in the horizontal direction,
make this adjustment
Select the same signal for the LINE A and
LINE B images.
For example, select the signal input tothe INPUT 1
jacks.
Adjust the volume by pressing » or v .
'A smo increase
the volume,
'v ~=to decrease the volume.
[a] The indicator shows
the adjustment level.
Adjusting the Luminance
It the luminance levels unsatisfactory, make this,
adjustment.
Mix the LINE A and LINE B images
using the jad wipe pattern (page 20).
{a] LINE A image
TRILINE B image
Press LUMINANCE/H CENTER to tur
'The A and v buttons ight up automatically
[a] For LINE A image
{b] For LINE B image
Press LUMINANCE/H CENTER.
The A and V buttons ight up automaticaly
[a] For LINE A image
[b] For LINE B image
2 Adjust the luminance level by pressing ~
ory.
-1o increase the luminance level.
"19 decrease the luminance level
{2} The ingicator shows the adjustment level.
pressing < or >
<
~=-To move the image towards the loft
>
snTo move the image towards the right
4 Adjust the horizontal center by
[e] The indicator shows the adjustment level
Advertisement
Table of Contents
