Zanussi FMW 5613 Instructions For The Use And Care page 21

Warning
Before removing the back panel the oven
must be disconnected and the grill
element removed, remember to put the
ceramic safety plug into the socket
(Fig. 6). To remove the back panel use a
screwdriver (Fig. 11). This is a good
opportunity to clean the back of the rear
panel.
Control knobs
These can be removed by carefully pulling
them off. Push back on to replace.
Oven lamp replacement
Push in and unscrew anticlockwise the
glass cap (fig. 12). Remove the faulty
bulb and replace with one that resists to
high temperatures (300°C). Electric bulb:
15W 240Y 50Hz, 300°C, E14. Bulbs are
available from your Zanussi Service
Network.
SB
N
21