Advertisement
Help Guide
Sound Bar
HT-A7000
Operating the Speaker System by Interlocking with a TV (Control for HDMI Function)
Connecting a TV compatible with the Control for HDMI function using an HDMI cable enables you to interlock the
speaker system operation such as power on/off or volume adjustment with a TV.
About the Control for HDMI function
The Control for HDMI function is a function that enables operation of devices connected with an HDMI (High-Definition
Multimedia Interface) cable by interlocking them.
Although this function works for devices compatible with the Control for HDMI function, it may not work if connecting
devices other than those manufactured by Sony.
Preparing to operate by interlocking with a TV
Enable the Control for HDMI function settings of the TV connected to the speaker system with an HDMI cable.
The default setting of the Control for HDMI function of the speaker system is [On].
Hint
When connecting a device such as a Blu-ray Disc player to a TV with an HDMI cable, enable its Control for HDMI function.
To enable the Control for HDMI function of a TV or Blu-ray Disc player, refer to their operating instructions.
If you enable the Control for HDMI ("BRAVIA" sync) function when using a TV manufactured by Sony, the Control for HDMI
function of the speaker system is also enabled automatically. When the setting is complete, [DONE] appears in the front panel
display.
Performing power operation or volume adjustment by a TV remote control
When turning the TV on/off or adjusting the volume using the TV remote control, the speaker system power operation or
volume adjustment is interlocked.
TV
TV remote control
Power interlocking
When you turn on or off the TV, the speaker system will turn on or off automatically.
89
Advertisement
