Advertisement
Help Guide
Sound Bar
HT-A7000
Connecting the Optional Speaker with the Manual Connection
The optional speaker is connected to the speaker system automatically when it is turned on. For details, refer to the
operating instructions of the optional speaker.
If the optional speaker cannot be connected to the speaker system automatically, perform the manual connection by
following the steps below.
Press HOME.
1
The home menu appears on the TV screen.
Select
[Setup] - [Advanced Settings] on the home menu.
2
Select [Speaker Settings] - [Wireless Speaker Settings] - [Start manual linking].
3
The [Start manual linking] screen appears on the TV screen.
Press LINK on the optional speaker.
4
The power indicator of the optional speaker that had LINK pressed flashes twice repeatedly in green.
Select [Start].
5
The manual connection starts.
The connecting process appears on the TV screen.
To cancel the manual connection, select [Cancel].
When the optional speaker which you want to connect displays [Connected], select [Finish].
6
Press
(enter).
7
The manual connection is established and the power indicator of the optional speaker lights in green.
Note
If you perform [Start manual linking],
mode] is set to [Manual] automatically.
Only the speakers for which [Connected] has been displayed in step 6 connect to the speaker system. If the optional speaker is
not properly connected, perform the operation again from step 1.
[Setup] - [Advanced Settings] - [Speaker Settings] - [Wireless Speaker Settings] - [Link
5-024-835-11(5) Copyright 2021 Sony Corporation
38
Advertisement
