System Requirements And Equipment; Connection And Configuration - D-Link DIR-615 Quick Installation Manual

System Requirements and Equipment

A computer with any operating system that supports a web browser.
•
A web browser to access the web-based interface of the router: Apple Safari
•
8 and later, Google Chrome 48 and later, Microsoft Internet Explorer 10 and
later, Microsoft Edge 20.10240 and later, Mozilla Firefox 44 and later,
Opera 35 and later.
A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
•
An 802.11b, g, or n Wi-Fi adapter to create a wireless network.
•

CONNECTION AND CONFIGURATION

1. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
2. Connect the router to your PC.
PC with Ethernet adapter: connect an Ethernet cable between an
•
available Ethernet port of the router and the Ethernet port of your PC.
Turn on your PC and wait until your operating system is completely
loaded. Make sure that your Ethernet adapter is configured to obtain an
IP address automatically.
PC with Wi-Fi adapter: turn on your PC and wait until your operating
•
system is completely loaded. Then turn on your Wi-Fi adapter and make
sure that it is configured to obtain an IP address automatically. Connect
to the network DIR-615T. Use WPS PIN from the barcode label as the
network key.
3. Start a web browser. In the address bar of the web browser, enter the IP
address of the router (by default, 192.168.0.1). Press the Enter key.
After the first access to the web-based interface you are forwarded to the start
page of the Initial Configuration Wizard.
Click the START button.
4.
5. Select a language for the router's web-based interface.
6. Click the CONTINUE button in order to configure the device with the
Initial Configuration Wizard or the ADVANCED SETTINGS button to
configure all needed setting manually.