2 Location of Controls and Components Attachment screw Protective glass (front) Lens Adjustment dial cover Protective glass (rear) Camera body attachment part (convex) Vertical position adjustment dial Vertical alignment adjustment dial Horizontal image position adjustment dial Lens front cap 10 Horizontal line for adjustment...
Page 4
Adjust the attachment position and record When using for the first time, be sure to adjust the 3D Conversion Lens attachment position. Change the mode to on the video camera ● Attach the 3D Conversion Lens to the Attach the lens front cap to the 3D video camera.
Page 5
(After checking the operation description, touch (After checking the operation description, touch [NEXT].) [NEXT].) Adjust the vertical alignment adjustment dial To adjust the vertical position, rotate to align the vertical position of the the vertical position adjustment dial subject shown duplicated. so that the black horizontal line at the right of the screen is in the center of the red guidelines...
4 Disassembly and Assembly Instructions 4.1. Disassembly Flow Chart 4.2.1. Removal of the Bottom Case and Front Case Unit This is a disassembling chart. When assembling, perform this chart conversely. 4.2. Disassembly Procedure Item Removal Bottom Case Fig. L1 5 Screws (A) Front Case Unit Bottom Case Front Case Unit...
Page 8
4.2.2. Removal of the Adjustment Dial 4.2.3. Removal of the Lens Barrel Unit Cover Fig. L3 Fig. L2...
Page 9
4.2.4. Removal of the Fixing Base and Fixing Dial Fig. L5 Fig. L4...
Page 10
4.2.5. Removal of the Horizontal Position Adjustment Dial Unit Fig. L6...
5.3. Replacement Parts List Notes: Safety Ref. Part No. Part Name & Descrip- Pcs Remarks *Important safety notice: tion VGQ0U39 REAR CAP For the Components identified by mark have special character- step up ring istics important for safety. VQL2G87 OPERATION SHEET When replacing any of components, be sure to use only VQL2G86 OPERATION SHEET...