How To Read Electric Wire Code - Komatsu PC200 Shop Manual

FOREWORD

HOW TO READ ELECTRIC WIRE CODE

★ The information about the wires unique to each machine model is described in Troubleshooting section, Re-
lational information of troubleshooting.
In the electric circuit diagram, the material, thickness, and color of each electric wire are indicated by symbols.
The electric wire code is helpful in understanding the electric circuit diagram.
Example: AEX 0.85
1. Type, symbol, and material
AV and AVS are different in only thickness and outside diameter of the cover. AEX is similar to AV in thick-
ness and outside diameter of AEX and different from AV and AVS in material of the cover.
(Table 1)
Sym-
Type
bol
Conduc-
Low-voltage
wire for AV
automobile
Insulator
Thin-cover Conduc-
low-voltage
AVS
wire for
Insulator
automobile
Conduc-
Heat-resis-
tant low-volt-
AEX
age wire for
Insulator
automobile
00-12
(14)
L - - - Indicates blue, heat-resistant, low-voltage wire for automobile, having nomi-
nal No. of 0.85
Indicates color of wire by color code.
Color codes are shown in Table 3.
Indicates size of wire by nominal No.
Size (Nominal No.) is shown in Table 2.
Indicates type of wire by symbol.
Type, symbol, and material of wire are shown in Table 1.
(Since AV and AVS are classified by size (nominal No.), they are not indi-
cated.)
Material
Annealed copper for elec-
tor tric appliance
Soft polyvinyl chloride
Annealed copper for elec-
tor tric appliance
Soft polyvinyl chloride
Annealed copper for elec-
tor tric appliance
Heat-resistant crosslinked
polyethylene
HOW TO READ ELECTRIC WIRE CODE
Using
temperature Example of use
range (°C)
General wiring
(Nominal No. 5 and above)
–30 to +60
General wiring
(Nominal No. 3 and below)
General wiring in extremely
–50 to +110 cold district, wiring at high-tem-
perature place
PC200/220(LC)-7