Advertisement
ISASSEMBLY
INSTRUCTIONS
CABINET BACK REMOVAL
PAN Screw
PAN Screw
ip
ha
hadt
1.4¢ x 4mm
1.76 x 11mm
On
ee
Chromium-plated
Chromium-plated
)
2. Loosen
each set screw (A) and(B) on the reverse side
9
®
of the back cabinet, two set screws(C)on the bottom
side and two set screws(D)on the flank side for union
with the front cabinet.
The
back cabinet will be
ready for removing.
Figure
4,
BID Screw 2¢ x 8mm ©)
Chromium-plated
PAN
Screw
oN
f
1.49 x 3mm
Y
Chromium-plated
Figure
5.
=
® BID Tapping Screw
€
BID Tapping Screw, RED
FRONT PANEL REMOVAL
2% x 6mm
\ %
2.68 x 8mm
1. Remove
the back cabinet.
2. Loosen
and remove
one mechanical
set screw (E).
3. Loosen and remove one set screw (F) for assemblying
G
the microphone and (DC in 6V) jack ©. The front
(DIC in 6V)
cabinet is now ready for removing.
sack
FLT
Tapping Screw BLK |
Figure
6.
HOW TO OPEN P.C. BOARD
1.4¢ x3.5mm (1)
1. Remove the back cabinet.
~
aap
2. Remove
the PC plate and one set screw(H) for the
mechanical body.
3. Open the cassette cover and remove the base for the
*
t
#
fGN
rr
mechanical
body
and
the
set
screw (1) for
the
connector,
Figure 7.
Advertisement
