Advertisement
Unlocking programs temporarily
If you try to watch a TV program that exceeds the rating
limits you set, the monitor enters program lock mode. You
can either unlock the proglam temporarily (see steps 2-3
below) or select an unlocked program to watch.
2
3
SS
MUTE
To temporarily
unlock tile program,
pre._s © whde tile
message
is on-screen.
Press the Number buttons (0-9) to enter your 4-digit PIN
code, and then press @.
If the correct code is entered, the program lock mode is
released and the normal picture appears.
All locking is disabled until the monitor is turned oft: and
will be enabled when the monitor is turned on again.
Changing your PIN code
1
Select the Locks menu.
2
Press • or • to highlight
New PIN Code.
V-Chip
3
Press the Number buttons to enter a new four-digit code.
4
Press ,@. The new PIN code is now active.
Usingthe PCsettingfeature
You can view the image from a PC on the monitor's
screen.
The PC must be connected
to the monitor's
PC IN terminals.
(ir_'_page 15).
You can use the PC Settings
feature to adjust the picture's
horizontal
position/width,
vertical
position/height,
clock
phase, and sampling
clock.
Note: tf a PC is not connected,
this feature will be grayed out
in the Set Up menu.
To adjust the PC settings:
2
3
Repeatedly
press @
to select PC input mode
(Ir_ _" "Selecting
the video input source to view"
on page 25).
SS
MENU
Pre.;s
O and open the Set
Up menu.
Highlight
PC Settings
and press @.
Language
AV Connection
_[_
4
Press • or • to highlight the item you want to adjust.
5
Press • or • to make the appropriate adjustments.
Horizontal
Width
VerticalPosition
Vertical
Height
Clock
Phase
• Horizontal
Position:
Moves the picture
lefi/6ght.
The adjustment
range is within _+5fi'om center.*
• Horizontal
Width:
Adjusts
the width of the picture.
The adjustment
range is within _+5fi'om center.*
• Vertical
Position:
Moves the picture
up/down.
The adjustment
range is within _+5fi'om center.*
• Vertical
Height:
Adjusts
the height of the picture.
The adjustment
range is within _+5from center.*
• Clock
Phase:
Helps to reduce noise and sharpen the
picture.
The adjustment
range is within _+15 from center.*
•
Sampling
Clock:
Helps to minimize
periodic
vertical
stripes on the screen.
The adjustment
range is within _+15 from center.*
• Reset:
To reset the PC setting,
select Reset
and press @.
".'The range of adjustment
may vary slightly.
37
Advertisement
