How To Remove: Shelf Supports; How To Use: Pyrolytic Cleaning - AEG BPS335061M User Manual

12.2 How to remove: Shelf supports

Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until
it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side wall
and remove it.
Step 4 Install the shelf supports in the
opposite sequence.

12.3 How to use: Pyrolytic Cleaning

Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
CAUTION!
If there are other appliances installed in the same cabinet, do not use them at the
same time as this function. It can cause damage to the oven.
Turn off the oven and wait
until it is cold.
Step 1
C1 - Light cleaning
C2 - Normal cleaning
Before the Pyrolytic Cleaning:
Remove all accessories.
Pyrolytic Cleaning
Option
CARE AND CLEANING
1
Clean the oven floor and the in‐
ner door glass with warm water,
a soft cloth and a mild detergent.
Enter menu: Cleaning
Duration
1 h 30 min
2
.
1 h
65/152