6” x 9” coaxial speakers designed and engineered to connect and mount to kenwood ca-cut14, ca-lid98, & other brands of 6” x 9” lids for harley-davidson® motorcycles
Page 1
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product.
Page 2
Contents Section 1: Installation Instructions to KENWOOD CA-CUT14 for 2014-Current Bikes..3 Section 2: Installation Instructions to KENWOOD CA-LID98 Lids for 1998-2013 Bikes..3 Section 3: Installation Instructions for another brand of 6" x 9" lids.........4 Warranty Info..........................5...
Section 1 - Installation Instructions to KENWOOD CA-CUT14 for 2014-Current Bikes Installation procedure The CA-CUT14 (sold separately) enables you to install the XM69R speakers into select hard saddlebag lids without a pre-existing speaker option. Please reference the CA-CUT14 instruction manual for detailed installation instructions.
Section 2 - Installation Instructions to KENWOOD CA-LID98 Lids for 1998-2013 Bikes On the speaker itself, you will see a “lip” that goes around the perimeter of the speaker’s steel frame. The side of the gasket with the groove on the outside will “mate” to the lip around the speaker.
The following are not covered by the warranty: 1. Any product which is not distributed in the USA by KENWOOD or which is not purchased in the USA from an authorized KENWOOD dealer or an automobile dealer, unless the product is purchased through the U.S.A.