Panasonic KX-G8300 Service Manual And Technical Manual page 12

LO Ger Kitt)
4. Remove the cover, be careful not to damage the rubber gasket.
+ Cover
Fig. 8
5. Install the antenna unit on the radar mount.
If the thickness of the radar mount is more than 0.28 inch (7mm), use the extra set of included bolts (1" (25 mm)).
Cable Entry Point
Stern
Cable Entry
Spring Washer
Bolt Do not apply excessive
— torque to fix the bolts.
gj 0.78" (20mm) (Fixing torque: 200 to 250kg
or cm)
&— I" (25mm)
Make sure the antenna unit is installed in the proper direction of the ships bow and stern.
The cable entry must face in direction of the stern.