Panasonic FZ-1 Service Manual page 11

FZ-1
Cushion
Fan Motor
Figure 4
Power Transformer
AC Power Cord
,,,,.-~"
0 \
\
CD
I
CN1 '\. /
......__
_
---
Figure 5
Fan Motor
r-----1
I
w
CN660
I ,________,~ I
~,,,,.....=~~
I
rtt
$,'1.---------'
1---i
I
I
I
I
\..
______
./
Figure 6
2-3
(4) Unhook four hooks <D> as shown in Figure 4.
(5) Raise the CD-ROM Drive shield plate.
*Reassemble in the reverse order.
(1) After removing the top case and the CD-ROM
drive, remove two screws <E> (3
x
10 mm),
then disconnect two connectors (CN 1, CN 3)
as shown in Figure 5.
(2) Raise the power transformer (with the
AC power cord).
*Reassemble in the reverse order.
(1) After removing the top case. the CD-ROM
drive, and the power transformer, disconnect
the connector (CN 660) as shown in Figure 6.
(2) Remove the fan motor.
*Reassemble in the reverse order.