Panasonic FZ-1 Service Manual page 12

DRAM PCB
OPEN/CLOSE Button
Power Button
Figure 7
Light Leading Panel
-
- - - -
I
Hooks
\..
_________
...)
Figure 8
Shleld Plates
Figure 9
<F>
2-4
(1) After removing the top case, the CD-ROM
drive, the power transformer, and the fan
motor, raise the power button and the
open/close button as shown in Figure 7.
FZ-1
(2) Gently pull out the light leading panel from the
bottom cabinet while pushing two hooks as
shown in Figure 8.
(3) Remove all thirteen screws <F> (2.6
x
8 mm)
as shown in Figure 9.
(4) Carefully raise two shield plates.