About The Floor Screen Size - Mitsubishi Electric TG-2000A Operation Manual

4.4 About the Floor Screen Size

In regard to the floor screen and the sub screen, it is possible to draw them beforehand by using an application other than MS
Paint. However, the image must be in "bmp" format with ".bmp" at the end of the file name.
The size and file name of each screen must comply with the specifications below.
Screen
Floor Screen
4 division
Sub Screen
6 division
Note:
- After running the TG-2000A setup, copy the file to the specified folder.
- If you copy the file from a CD-R or similar, open the file's properties and deselect "read-only".
- In wide area mode, the name of the folder containing the database file will be different. Please see Appendix 2 for
details.
Size
Width 1000, height 575
(pixels)
Width 174, height 100
(pixels)
Width 261, height 100
(pixels)
11
File Name
Floor***.bmp
(***: 001~099)
BaseFloor****.bmp
(****: 1001~1099)
BaseFloor****.bmp
(****: 2001~2099)
Notes
The file must be in C:\TG2000\Floor
The file must be in C:\TG2000\Floor