Table of Contents
Advertisement
From Antenna
Stereo VCR
TV
DVD Player with component video
Connecting
two VCRs
This connection
allows you to record (dub/edit)
from one VCR to
another
VCR while watching
a video program.
You will also be able to
record from one TV channel
while watching
another
channel.
You will need:
• two coaxial cables (one or more may be provided
by your cable
company)
• two pairs of audio cables (two single audio cables for mono
VCas)
• two video cables
From Antenna
VCR1
TV
Note:
To play from the DVD player, the DVD player
and TV must use ColorStream connections.
Theunauthorized r ecording, use,distribution,
orrevision oftelevision programs, videotapes,
DVDs, a ndothermaterials is prohibited u nder
theCopyright L awsofthe United Statesand
othercountries, andmaysubject y outo civil
andcriminal l iability.
Note:
Do not connect the same VCR to the output
and inputjacks on the TVat the same time.
ff you are using an S-VHS VCR,use an
S-video cable instead of a standard video
cable for better picture performance.
Do not connect a standard video cable and
an S-video cable to Video-7 (or Video-2)at
the same time or the picture performance will
be unacceptable.
Todub or edit, VCR 2 mustselect Line IN,
and the TVmust select Video-7.
* TheAudio OUTjacks can output the
sound of either the main or PIP picture
(see "Selecting the Audio OUT sound" on
page 43).
** The Video OUTjack does not output a PIP
picture.
10
VCR2
Advertisement
Table of Contents
