No.
1
2
3
4
1.3 HDD Installation
Press the blue button and then hold the casing to pull out the HDD case and then install the HDD
①
into the case.
②
Fix the HDD by tightening the screws on both side of the case.
Push the case with the HDD screwed in into the slot.
③
Close the latch to fix casing in place.
④
2 Default System Configuration
The default network configurations of the server are as follows:
IP Address:
192.168.0.10
Http Port:
8000
To avoid IP conflicts, it is recommended to configure one disk at a time as these storage
servers have the same default network configuration.
MVMS Storage Server User Manual
Description
Redundant Power Connector
Management interface
RS232 interface
USB2.0 interface
No.
5
USB3.0 interface
6
RJ45 interface
7
VGA interface
2
Description