Unpacking; Hooking Up The System - Sony DVP-S300 Operating Instructions Manual

Unpacking
Check that you have the following items:
• Audio/Video/S-link connecting cord (1)
• S video cable (1)
• Remote commander (remote) RMT-D105A (1)
• Size AA (R6) batteries (2)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two R6 (size AA) batteries by matching the + and
- on the batteries. When using the remote, point it at
the remote sensor i on the player.
*_° You can control Sony Ws and AV receivers usingthe
supplied remote
See page 30.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you will not use the remote for an extended period of
time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
Hooking Up the System
Overview
This section describes how to hook up the CD/DVI_
player to a TV (with audio/video input jacks) and/or
an amplifier.# You cannot co_nnect this player to a TV
without a video input connector. Be sure to turn off
the power of each component before making the
connections.
1To listen to the sound through TVspeakers
CD/DVD player
_--I To AUDIO To VIDEO
OUT OUT To an AC outlet
r-_.: Signal flow
TV
I
To video J
input _--'_._ @ J
To audiol
input !
To an AC outlet
IITo listen to the soundthrough speakers connectedto
an amplifier (receiver)
CD/DVD player
_J To To
AUDIO VIDEO To an AC
OUT OUT outlet
TV
Amplifier To audio
(Receiver) input _
c_ : Signal flow
To an AC outlet
d
To an AC outlet
EN