Unpacking; Hooking Up The System - Sony DVP-S3000 Manual

Unpacking
Check that you have the following items:
• Audio/video/S-link connecting cord (1)
• S video cable (1)
• Remote commander (remote) RMT-D100U (1)
• Sony R6 (size AA) batteries (2)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two R6 (size AA) batteries by matching the + and
- on the batteries. When using the remote, point it at
the remote sensor [] on the player.
"_" You can control Sony TVs with the [] mark using
supplied remote
See page 42.
"(_° When to replace batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the player,
replace all the batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you will not use the remote for an extended period of
time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
Hooking Up the System
Overview
This section describes how to hook up the CD/DVI_
player to a TV (with audio/video input jacks) and/or
an amplifier.f You cannot connect this player to a TV
without a video input connector. Be sure to turn off
the power of each component before making the
connections.
[]To listen to the sound through W speakers
CD/DVD player
To AUDIO
OUT
To VIDEO
OUT
,_t_: Signal flow
To an AC outlet
TV
To video _ i
input
I
Toao'o I
input
To an AC outlet
[]To listen to the sound through speakersconnected to
an amplifier
CD/DVD player
To
I VIDEO
OUT
To To an AC
AUDIO TV outlet
OUT
To an AC outlet
c:_: Signal flow To an AC outlet
6 EN