Pioneer PL-L70 Operating Instructions Manual

Operating
Instructions
STEREO TURNTABLE
L-L.7O
Thank you for buying this Pioneer product.
Please read through these operating instructions and then you
will know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
In accordance with the power and voltage requirements of dif-
fering areas, the following model names are used to designate
models with differing electrical specifications.
Line voltage
HEM, HB,
a.c. 220, 240 valts © (Switchable voltage}
INEZ a : Beret
20-240 volts ~
S,$/G, SS | AC 110, 120, 220, 240 volts (Switchable voltage)
Ip, D/G AC 120, 220, 240 volts {Switchable voltage)
R, RIG meet "AC 1 10120, 220~240 volts (Switchable voltage! |
Ku,Ko) [AC 10vols
YP, YB 6. 240 volts ~~ "|
NOTES:
* The model names are stamped an the packing case.
° These operating instructions are prepared on the basis of the
HEM model, and they can be used for other models. Although
the design of the power plug and the power outlet shown may
differ from the actual one, the operating procedures are the
same.
WARNING: to prevent eine OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Panel Facilities
Operations before Use
R&GOrE Play: sisicactcnrmamivenearenennneeaie ecveetnelic
ee EAT
i
________CONTENTS___
Ru,
LINE VOLTAGE SELECTOR SWITCH
[only multi voltage models are provided with this
switch but U.S.A, and Canada models are not pro-
vided with this switch]
The line voltage selector switch is located on the top of the
cabinet of this turntable. Before your turntable is shipped from
the factory, the switch is set to the power requirements of the
turntable's destination. Check that it is set properly before
plugging the power cord into the outlet. If the voltage is not
properly set or if you move to an area where the voltage re-
quirements differ, adjust the selector switch as follows:
e Provide yourself with a medium-sized screwdriver, Insert
the tip of the screwdriver into the groove of the selector
switch and turn it so that the power voltage marking of
your area points to the arrow.
a
IMPORTANT NOTICE [For U.S.A, and Canada
models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep in a secure area. This is for your security.
Maintenance ...
Specifications .
TOUbEShOStIN" -wenessedemewerareetickens 12
Y) PIONEER'