Programming
the
Remote
Control
The remote
control
is preset
to operate
Sony brand
video
equipment.
Beta, Ed Beta VCRs
AV1
303
8 mm VCR
AV2
302
VtIS VCR
AV3
301
DVD player
DVD
751
If you have
video
equipment
other
than Sony brand
that you want
to
control
with
the TV's remote
control,
use the following
procedure
to
program
the remote
control.
If morethan one code
number is listed, try
entering them one by one
2
until you cometo the
3
correct codefor your
4
equipment.
5
If you enter a new code
number,the codenumber
you previouslyentered at
that setting is erased.
In somecases,you maynot
be able to operate your
6
equipment with the
supplied remote control. In
such cases,use the
equipment's own remote
control unit.
Wheneveryou removethe
batteries to replacethem,
the code numbersmay
revertto the factory setting
and must be reset.
Turn
to the list of "Manufacturer's
Codes"
on page
44, and find
the three-digit
code number
for the manufacturer
of your
equipment.
(If more
than one code number
is listed,
use the
number
listed
first.)
Set the A/V
slide switch
to 1, 2, 3, or f)Vl).
Press
CODFSE'2
Enter
the three-digit
manufacturer's
code number.
Press
ENTER.
Ib check
if the code number
works,
aim the TV's remote
control
at the equipment
and
press
the POWEBbutton
that corresponds
with that equipment.
If it responds,
you are done.
If not, try using
another
code
listed
for that manufacturer.