Table of Contents
Advertisement
To set clock/calendar
1
Press CLOCK.
Select AM or PM.
Press [8] for AM or [5]
for PM.
Set the time.
For
example,
press
[0] [2] [0] for 10:20.
Set the calendar.
For
example,
press
O4
6
for
4 of June, 1988.
The day of week appears automatically.
After setting the calen-
dar, press CLOCK.
Year
disappers
from
the display panel and
the clock starts counting.
Note: If you don't press CLOCK and leave it for
about one minute, the display changes to above one
and clock starts counting.
1
Press CLOCK.
Press
RECALL/COR-
DAY MONTH YEAR
RECT repeatedly until
gage
a
the incorrect digit
flashes.
Press the correct digit
of 10-key button.
Then press CLOCK.
1
Press CLOCK.
The year appears along
with the blinking
"TRANS".
Press
TRANS
while
aiming the remote con-
trol unit to the VTR.
The transferred clock/
Press CLOCK to return
the display panel of re-
mote
control
unit to
the normal display.
To programme the timer
1
recording on 7 of June.
Note: If you want to start recording on the displayed
date, skip to step 7.
press TRANS.
a bt
o
23
Advertisement
Table of Contents
